oscillators

there are three oscillators available. for each one, select between [off] or:

multiOscillator(Master)
 

multiOscillator(Slave)
sync source can be oscs1-3, and gate.
primarily for (hard)sync and FM.

morSaw
morphs between sine and saw waveform.

morPW
morphs between sine and pulse waveform.

rawSaw
clearer, but in higher regions slightly distorted sound.
Choose between sawUp and sawDown.

uknow
fat multi osc w/ pulse, saw, sub waveforms. phase control for pulse and saw waves.

waldorf
waveform select helper by additional panel.

inserts

in total, there are 10 inserts available, which can be selected in the 12 insert containers 11-16 and 21-26. 

BitChop
range 32 down to 1 bit.
only available in inserts 11 and 21.

T-Delay
tempo delay in range of 4-5461ms.
can be synced to bpm.
not available in inserts 11 and 21.

Division
as the name implies, the input signal is divided by the divisor signal - or vice versa, if you click [swap].

Multiply
input is multiplied by the modulation source.
other name for VCA.

x^2or3
input is squared or cubed (switchable).

MultiModeFilter
standard 12dB filter with lowpass, bandpass and highpass outputs (switchable).
 

CombFilter
filter tuning by setting the coarse control (+-24).

VocalFilter
xMod=fade between the vowels
frqMod=modulates FrequencyOffset

8kModDelay
delayTime:0-166ms, can be modulated.
amplif. = FB

Mix4
same input choices as in  SourceMix1/2.