Flexor’s equivalent to CWs MidiClock. Basically an accurate sawUp lfo. Needed to run the Flexor sequencer modules.
The way Flexor computes Ramp values to seq steps is described here: TablesI (Value>FlexorSeqRamp)
dspLoad 11.60/8.30/8.40

RampStateIndicator
indicates the approximate time position of  Ramp and connected Seq modules.
dspLoad 0.30

RampDistributor2/4
divides one ramp into 2 resp. 4. After the first ramp finished, the next starts.
dspLoad 2.10/2.00/5.30 (RampDist.2)
dspLoad 9.00/5.70/5.80 (RampDist.4)

SeqJoiner32/64
similiar to RampDistributor, but additionally  the outputs of the involved seq modules can be connected to the “Ins” 1,2 or 1-4: [Out] is the overall output of all modules.

dspLoad 4.20/7.40/4.30 (Seq.Joiner32)
dspLoad 15.20/12.10/12.00 (Seq.Joiner64)

Ramp Devider
multiplies the freq of the Ramp.
Range 0->128.
dspLoad 8.80/5.60/5.60

Poly Rhythmer
sets the number of steps Flexor seq modules will play. The tempo of a sequence will be adjusted, so, for example, if  [Start] is set to 1 and [End] is set to 2, the resulting 2 steps will take the same time as a complete 16-step sequence.
dspLoad 11.70/8.50/8.50

Gate2Ramp
Each time a gate message is received, the output sends a control message which will force a seq module to progress to the next step.
dspLoad 13.80/10.60/10.50

RampRanger
defines start + end position of the input [Ramp]. Output is 8bit of course (so it’s not suited for mod inputs like env, lfo etc).
dspLoad 2.70/5.90/2.70

Length control + LengthMod control.
Monophonic. dspLoad 37.70/34.40/-

as above; new Pattern management.
Max.Poly: 2  dspLoad 36.80/33.70/-

unipolar/bipolar switch, Draw pencil. Monophonic. dspLoad 29.30/26.00/26.00

as above; new Pattern management; edit all 16 steps at one go (“draw by mouse”).
Max.Poly:4 dspLoad 22.90/19.70/19.70

FreqOut->[ControlSmoother]>Osc FreqIn. Monophonic. dspLoad 40.70/37.60/-

as above; new Pattern management, “draws” melodies with the mouse.
Max.Poly: 2 dspLoad 40.10/36.80/-

plays 16 inputs in a sequence.
Monophonic. dspLoad 47.80/-/-

provides smooth transitions between the 16steps, and also betw. the last and first step. Max Poly:2
dspLoad 45.60/-/-

Seq general
Seq CW
Seq Flexor
Seq CWModular