dspLoad 8.70/5.40/5.40
creates 4 upper octaves at 4 outputs - when fed with a sine-shaped osc.
If a different type of osc is connected, the results vary, depending primarily on osc shape and input volume.
While pulsewaves are not suitable for this module, WavetableOSC is fun.
mp3 MultiOscSine>4SinOct
mp3 NBLsaw>Saw3TriSin>4SinOct
mp3 WavetableOSC>4SinOct
MultiOsc sounding most clearly,
NBLsaw is somehow distorted,
Wavetable quantization can be heard.
max. poly 16

oct1

oct2

oct3

oct4

Flexor Saw2TriSin

Flexor NBL Saw

WavetableOSC:Sine
(Grunge=Max)

dspLoad 13.30/10.00/10.00
same as above, for triangle OSCs.

dspLoad 40.80/37.60/-
divides the incoming signal into four amplitude sections:
Section1 range +0.50 to 1.00
Section2 range   0.00 to +0.50
Section3 range -0.50  to  0.00
Section4 range -1.00  to -0.5
With the four faders amplitude and polarity can be changed, and also modulated via the four control inputs.
mp3 seq using wavetableOSC fed to QuadShaper.
max. poly 2

[9] = fader fully engaged
[-] = fader in mid position/inactive

dspLoad 9.50/6.30/6.30
creates a pulse signal as the incoming signal crosses the zero-line heading in a positive direction. The shaper’s output toggles between 1 and -1; result is a pulse wave tuned one octave below the input signal.
max. poly 14

Shapers
Distortion
Formantors
Harmonic
Osc_Shapers1
Osc_Shapers2
Saturation
Special1
Special2
Special3
Cheby&Additive
TerrainOsc