polyFilter

dspLoad 3.70/6.90/3.70
Ultra-flexible multifilter with 25 different (some of them unique) filter models.
Thru: filter is bypassed; amplitude loss is ~12dB

Filter types:
12/24/36dB Lp.
12/24/36dB Lp R (“retro”: original signal is just slightly attenuated so that the freq. range near the resonance peak is less strongly emphasized; filter offers full self-resonance).
12/24 db Bp,Hp.
12/24 db BpR,HpR.
Contrary bp:like a 2poleBp & lp combo.
Swept EQ 1-3 octave: 24db EQ bell filters.
Swept Low Shelving: 24db lowpass EQ
Swept High Shelving: 24db highpass EQ

2-pole Notch: Frequencies around the cutoff freq are removed. Reso setting adjusts the notch width(reso0=>steep; resoMax=>flat)
Phaser1:combination of notch and peak filters.
Phaser2:classic phaser effect by combinig three notch and three peak filters.
Contrary Phaser: new type of comb filter which combines two notch filters with a bp filter.
FlangerLite: combo of three notch filters.
 

Flexor multimode filters

mf-2spice

dspLoad 17.80/14.50/14.60
12db multimode filter. Parallel Lp/Bp/Hp/Br outputs. Capable of self-oscillation.
Max Poly: 8

mf-2swiss

dspLoad 20.00/16.80/16.70
multimode with 6 filter types: Allpass, Lp4, Lp2, Bp, Hp2, Hp4.
Max Poly: 7

mf-4swiss

dspLoad 31.50/28.20/-
multimode with 15 filter types: Allpass, Lp4, Lp3, Lp2, Lp1, Lbp2, Lbp1, Bp2, Bp1, Hbp1, Hbp2, Hp1, Hp2, Hp3, Hp4.
The filter has an extra resonance control for extra steep filtering.
Max Poly: 3

12dB multimode

dspLoad 2.20/4.10/3.40
12db multimode filter without modulation inputs. Parallel Lp/Bp/Hp outputs.

multimodeFilter A

dspLoad 10.50/7.30/7.20
12/24db multimode filter. Filter types Lp, Bp, Hp.

multimodeFilter B

dspLoad 4.20/7.40/4.30
12db multimode filter with parallel Lp/Bp/Hp outputs.

multimodeFilter C

dspLoad 3.20/4.50/2.20
12db multimode filter. Filter types  Lp, Bp, Hp, Notch.

uknowFilter

dspLoad 8.70/5.60/5.50
12dB Lp => 6dB Hp.

multimodeFilter B2cwm

dspLoad 15.10/11.90/11.80
two 12dB Multimode filters. between F1 and F2 is a distortion unit. controls:
- filterType output select, cutoff, cf1ModAmount, cf2ModAmount, reso (for each filter)
- F2 input select: F1 Lp/Bp/Hp and dry (>parallel filter circuit)
- xFade between F1 and F2 outputs
- distortion amount and gain
two VUs show output after distortion, and after distortion amplification.
download here

Filter
Lp
Lp2
Bp/Br
Hp
Multi
Voc&Comb
AllPass
EQ
FFB
Crossover
Special

SpaceF
Zarg