MSE (linear)

dspLoad 10.80/7.60/7.60
poly 16

dspLoad 11.20/8.00/7.90
poly 15

dspLoad 12.30/9.00/9.00
poly 15

dspLoad 1.30/1.30/1.30
poly 16

dspLoad 2.40/4.30/3.60
poly 16

dspLoad 13.30/10.10/10.10
poly 15

dspLoad 2.30/4.30/3.50
poly 16

connections:
P1: output of level information to the previous stage.
typical connection: to N1 pad of the previous stage.
P2: input for the sync signal, so that the module knows when to start. typical connection: to N2 pad of prev. module.
P3: envelope signal input from prev module.
typical connection: N3 pad of the previous stage.
N1: input for the next stage level (sustain module, another MidStep module or Lfo). Typ. conn.: P1 of prev. module.
N2: output of the sync signal, a progressing ramp w/ the duration of the stage. Typical: connect to P2 of next module.
N3: Envelope output. Typ. conn.: P3 of prev. module.
All in all, the whole structure invites to experiments without limits.

MSEC (curve control)

dspLoad 12.90/9.60/9.70
poly 14

dspLoad 15.00/11.80/11.80
poly 14

dspLoad 13.30/10.00/1.00
poly 11

dspLoad 14.30/11.10/11.10
poly 11

dspLoad 14.30/11.10/11.10
poly 11

dspLoad 16.50/13.20/13.30
poly 11

dspLoad 15.40/1.20/12.10
poly 11

dspLoad 16.50/13.20/13.30
poly 9

Flexor3 MSEnvelopes:
there are seperate modules for the start, middle and end stages, and for sustain level and looping. The 1stStep, Attack, Mid and Release modules are available in MSE (linear) or MSEC (curve option) versions. Furthermore, there are _Mod versions of the MSEC modules to provide time and level modulation.
1stStep and Attack are mutually exclusive and must be the first stage of the envelope. Release can only be used at the end of the envelope. 

Envelopes
AD+D
AHD+AR
ADSR
Multisegment
MultisegmentFlexor3
Other
Esync
EnvelopeFollower