FMOperator:
dspLoad 3.40/6.60/3.30
can be used as modulator (AudioOut to another FmOperator’s FmAIns) or as carrier. Waveform is a sine wave. Controls and connections:
Coarse - changing pitch in steps (0.5-32)
Fine - finetuning between steps
Detune - range +/- 20; finer than “Fine”.
Fixed - fixed frequency, max. 9772Hz.
Fixed and Coarse/Fine/Detune are mutually exclusive.
Phase - control the Osc’s phase (only if Retr is enabled + gate input connected)
Retr - en/disable Osc retriggering by a...
Gate - signal
EG - connect to amplitude control (unipolar)
FmA1/2 - freq modulation inputs
modulationSynthesisOSC:
dspLoad 6.60/5.80/4.60
similar to FM Operator, but also capable of ring and amplitude modulation.
Instead of a gate input it has a Sync input, which can be connected to a Gate2Sync module, or a Sync oscillator SyncOut.

dspLoad 4.20/7.40/4.30
reduced version of FM Operator (no Fixed freq, no Phase control)
cwm download

dspLoad 15.10/11.90/11.80
FMosc with:
*2 FM modulator inputs, each with
*AD env (can be switched off),
*smooth (=>6dB Lp) and
*attenuation controls.
*gain mod (switch: int pot- ext.)
cwm download

FMcwm osc:
dspLoad 12.00/8.80/8.80
sine osc with 2xpitchMod, 1xFM, 2xAM, 1xadsr envelope.
title of the module (FMosc1/2/.../6) can be altered to keep track of things.
cwm download

Frequency Modulation

Ring Modulation

Amplitude Modulation

+

+

+

=

=

=

dspLoad 18.70/15.50/15.40
connect OSCoutputs to this router and freqMod outputs from router back to the OSCs. 32 algos can be selected. with fb control and esync inputs (connect involved eg esync outs here), input and output gain.
download

OSC overview
CzOscs
ModulationOSCs
MultiOSCs
NoiseOSCs
PulseOSCs
SampleOSCs
SawOSCs
SawOSCsFlexor
SineOSCs
SpecialOSCs
Spectral&MorphOSCs
TubeResonator
WaldorfOSC
WavetableOSC
UknowOSCs

SpaceF_OSCs
ZargOSCs