all MIDI clock modules:
dspLoad 0.00

MVCA

dspLoad 2.30/1.30/1.30

dspLoad 1.50/1.40/3.50

MVC A & B transmit MIDI messages from the host sequencer or keyboard into the Modular.
Controls:
Coarse, Fine - transpose/detune the pitch of the incoming note data.
PWR - PitchWheelRange (range 0-24/two octaves).
Portamento - glide between notes
Glissando - stepwise glide
Fingered Portamento/Glissando - glide only if played legato

connections:
MIDI in - connect it to a module which provides MIDI informations, usually the MIDI source module. Other possible modules are: MIDI Merger, keySplit, keyZone, ADs MIDI Router, NoteLength or Unison modules, MIDI Gater and MIDI Seq.
Freq - supplies frequency for oscillators and LFOs (if set to ext. freq).
SmplF - supplies pitch information for the SampleOSC.

Difference between MVC A and B:
MVC B has no Portamento and Curves controls. The dspLoad is exiguously lower.

 

MidiClock

standard module for triggering cw seq modules and to provide a constant frequency to freq divider modules, to sync LFOs or delays to song tempo. due to the instability of ext MIDI clock from your seq host software, always use the internal clock, esp. if used with freq divider connected to tempo delay modules.

instead of the original CW modules use Alfonso’s ClkDiv1 (PlanetZ download). The second output of clockDiv and clockDividerB is unstable; clockDivC has no St/St input.

dspLoad 22.20/19.00/19.00
4x clkDiv, FrqDiv, and ramp outputs. tempo mod input. with the trigger button internal (start button) or external (MVC) (re)start source is selected.
‘reset out’ can directly be connected to async seq modules (w/o gateOr).
cwm download

startStop only. output toggles between 0 (yellow) and [max] (white).
cwm download

MidiSeq

nice and plain seq for up to two sequences, each with up to 32 steps.
-Record a new seq: hit Rec/Play, select Seq1 or Seq2 and play notes.
-Add steps to the selected seq: first select Seq1 or Seq2, then hit Rec/Play and play notes.
-Rest Note: specifies a NoteNr to insert rests into the seq. Transposed octave setting (C1=>C0)!
-Easy transposition (in Play mode) by  incoming midi notes
Bad: no Start/Stop input = sync problems
Good: sequences are stored in presets
example patch

MIDI
MIDI-Tools