Midi-Tools

fra77’s Key-num to PrCh
dspLoad 0.00
Sends program changes by note numbers. Root noteNr. is 60. Download

fra77’s MIDI embedded outputs
dspLoad 0.60
Provides Midi output1 and Sequencer destination1 from within the Modular. Midi output1 and Sequencer destination1 have to be removed from the Project window. Works only if at least one PulsarG2 cards is in your setup. Download

fra77’s MDS/ ChanChanger 1-16
dspLoad 0.00
For use with the MDS8 drumsequencer module.
First instrument (“Bassdrum”) will trigger C3/60 on MidiCh1, the next (“Snare”) C3/60 on MidiCh2 a.s.o. Download

fra77’s MDS8 to Drum Map
dspLoad 0.00
For use with the MDS8 drumsequencer module.
First instrument (“Bassdrum”) will trigger C3/60, the next (“Snare”) B2/59 a.s.o.
Download

Fra77 KeyToMidiSplitter

fra77’s key to Midi splitter
dspLoad 0.00
incoming Midi notes (range c1/36-d#2/51) are transformed in the following way:
all notes are transposed to c3; the midiCh will be changed according to their noteNr.:1(c1) to 16 (d#2). Download

the module simply multiplies incoming midi notes. Because Midi is a serial interface, each note will be a little bit delayed, producing a thicker sound.
“Voices” setting in the Modular has to be adjusted + polyOut module added.
Can also be used with external synths: MidiIn=>Unison6=>MidiOut=>Synth.
PlanetZ download

the note length of incoming midi messages can be modulated by feeding in a control signal. Originally designed for the MDS8 seq module. Planetz download + discussion here

Midi channel filter.

midi monitor

shows incoming Midi messages.

Single= each new noteOn event produces a trigger signal. Legato= trigger only if there is a small gap between notes

midi gater

“gates” incoming MIDI notes by producing alternating velocity values of 0 and [original velocity value] at a given clock speed determined by the incoming clock signal. No Start/Stop input.

keyzone