CW drummodules features:
* preset lists
* fixed velocity feature only if module is triggered by gate
* can be connected directly with MidiIn
* if triggered by gate, of course no velocity sensivity
* sound stops whenever a signal is present at the MuteIn input
* “809”:affects envelope behaviour (hold<>hold-decay)
* “Snap”: additional “click”

drumOSC

DspLoad:16.00/12.80/12.80
presets: heavy bd + sd sounds, also (vintage Roland) perc & toms
1xsine + 1x noise Osc.
Osc2/noise: Color = basic tone.

drumSynth

DspLoad:27.80/24.60/-
the most flexible drum module.
presets:HH, BD, SD, toms, percussion.
2x sine + 1noise Osc.Sine1 is master over sine2. Osc1: Tune:overall tune. Osc2: detune relative to Osc1 (>toms).

HHsource

DspLoad:10.00/6.90/6.80

unique combination of 3 Oscillators and a noise source. NzBPF: filters the noise to “tune” the sound. VCA / envelope not included (VCA required)

percOSC

DspLoad:11.90/8.60/8.70
presets: bd, toms, and other percussion.
1x sineOsc.

sDrumOSC

Dsp Load dsp1: 0.90/0.90/0.00

Dsp Load dsp3: 1.70/1.80/2.70

loads *.wav or *.aif files.
 

DVC

DspLoad: 0.00

”drum MVC” (for single notes). Vel input:default velocity value if triggerded by a gate signal

muteAdd2

DspLoad: 0.00 typical use: Hihats

MDS8

DspLoad:0.00

modular 8track sequencer, designed especially for use with the DrumOscillator modules.
Sync:to SyncIn of the PatternSeq (if used)
Reset:to MVC gateOut->GateOr or to start/ stop module
Clock: to clock divider
PSQ: to PatternSeq (if used)
PNo.: to PS32 pattern switcher
(only if PSQ is not connected)
Out1-8:MidiOuts to Midi In of DrumOscillators or MidiToTrig modules
Options:normal/accent vel. settings, mute+solo
 Link: to give a clock signal to other seqmodule/s
grid edit key commands:
1=no trigger 2=normal 3=accent
(use arrow keys to navigate.)