cwmix8-2

characteristic:

simple 8 channel mixer

features:

pan, mute, 4x link.
2x2 outputs (switchable).

download:

 here

cwmix16-2

characteristic:

simple 16 channel mixer

features:

pan, mute, 8x link, VU per channel
2x2 outputs (switchable).

download:

here

cwmix8+8

characteristic:

compact 8 stereo + 8 mono channels mixer with inserts

features:

stereo channels: 2x stereo inserts, mute, VU l+r
mono channels: 2x mono inserts, pan, mute
all: VU audio source either pre or post inserts (switchable)

download:

here

cwmix16-3-2

characteristic:

16 channel project studio mixer

features:

per channel:
pre-attenuation, insert, 3-band eq, 3x stereo aux with post/pre eq switch and panning, 2x inserts, pan, mute, solo, 3x bus, link, gain fader
aux: insert, 3-band eq, on/off eq (saves dsp load if off), 2x inserts, mute, solo, 3xbus, on/off (saves dsp load if off)
bus: insert, 3-band eq, 2x inserts, mute, solo, int/ext switch (for extern bus processing), on/off (saves dsp load if off)
master: insert, 3-band eq, 4x inserts, stereo/mono (for checking mono compatibility), master<-> ext signal switch with ext gain (for fast comparison with other mixes).

in/outputs

inputs: 16x channel, Ext l+r, AuxRet1-3 l+r, Bus1-3 l+r
outputs: outL+R, Aux1-3 send l+r, Bus1-3 l+r

download:

here (copy dsp files to scope app/dsp folder if not present)

cwmix16-16

characteristic:

16 stereo + 16 mono channel project studio mixer

features:

per channel, from top to bottom:
channel select, channel on/off switch, pre-attenuation pot, VU after pre-attenuation, pre-eq insert, eq (see below), 4x aux incl. pre/post switches, 2x insert, pan, mute, solo, 4xbus select, gain fader with VU.
aux channels: see above, w/o aux.
bus channels: see above, w/o aux and bus.
master: pre-eq insert, eq (see below), 2x inserts, master<-> ext signal switch with ext gain pot. (for fast comparison with other mixes.)
channel edit: by pressing an channel edit button, you have access to a 4 band eq, with bypass for each band and all bands together:
lowEq (lowCut2, lowCut4 or lowshelve)
lowMid (bp, lowshelve or parEq)
highMid (bp, hiShelve or paraEq)
high (highCut2, highCut4 or hiShelve)
you can also select different colors and designated names for each channel.
additionally, there is a switch (next to preset lists) to choose the format for the channel numbers - either “1” to “32” , or “1/2” to “48”, which is the preferred format if you use sequencer software like Ableton, which has an identical asio numbering.
presets: there are separate preset lists for channel (channel gains only), names (alongside the faders), colors (all channel, aux + bus), and one for everything (“all”), except names and colors.

in/outputs:

inputs: 16x stereo + 16x mono, Ext l+r, AuxRet1-4 l+r, Bus1-4 l+r
outputs: outL+R, Aux1-4 send l+r, Bus1-4 l+r

download:

here